ID: 22810
Advertentie ID: #22810 is verwijderd van uw verlanglijst.
Musical Fidelity Home Theatre Processor (2009)
€600,00
Geen aanbiedingen geplaatst
Omschrijving
In zeer goede staat. Vijfkanaals voorversterker van zeer hoge kwaliteit. Kan ook als tweekanaals voorversterker gebruikt worden. Voldeed bij mij goed, met zeer goede eindversterkers. Bij mijn weten de enige MF versterker met toonregeling. Zeer luxe uitvoering. Bediening via logisch menuscherm. Afstandsbediening met verlichte knopjes, om tijdens het film kijken goed te kunnen bedienen! Zeer veel (aansluit)mogelijkheden. Nieuwprijs was rond €2500.
Uitgebreide beschrijving:
The HTP is an audio and video (AV) processor that decodes Dolby Digital*, Dolby Pro Logic* and DTS Digital SurroundTM. It will accept S-Video and composite video signals. It supports PAL and NTSC TV systems. It has been designed to operate with all Musical Fidelity Power amplifiers especially the HT600, 5 channel power amp. Used properly and carefully, it should give you many years of outstanding musical reproduction. Aesthetically, the HTP is a perfect match for the HT600 power amplifier, A3 CD player and the A3 Tuner.
The HTP can be used as either a high-end stereo preamplifier, a home cinema audio/video processor or a combination of both. The HTP performs Dolby Digital, Dolby Pro Logic and DTS Digital Surround decoding. The HTP will remain compatible with new multi-channel formats that will appear in the future. The HTP accepts up to eight digital input sources, eight line level input sources, a tape loop and two additional tape record outputs. It has four S-Video and four composite video inputs, SVideo and composite video outputs with OSD (On Screen Display). It also has, S-Video and composite outputs without OSD. The HTP has been configured by the factory to automatically sense the type of incoming audio and video signals. It will then select the mode that gives optimal reproduction quality.
Once the user has become more familiar with the setup menus the automatic detection can be disabled if required. The user can also change the name of the inputs so that they match the source device. i.e. Input 1 could be renamed to DVD. Input 2 to CD etc. When a two channel analogue (or digital) source has been selected you may then select different music modes that reproduce alternative effects. The modes are stereo, Dolby Pro-Logic, mono and four Music Modes: Natural, Concert, Club and Party. The various music modes cannot be used when the HTP detects a Dolby Digital or DTS multi-channel signal. The HTP will automatically disable the music mode functions. if these digital signals are detected. The HTP is supplied with two independently controlled trigger outputs, allowing the user to control external equipment. Each trigger has two output sockets and can be set to either 5V or 12V DC operation.
Uitgebreide beschrijving:
The HTP is an audio and video (AV) processor that decodes Dolby Digital*, Dolby Pro Logic* and DTS Digital SurroundTM. It will accept S-Video and composite video signals. It supports PAL and NTSC TV systems. It has been designed to operate with all Musical Fidelity Power amplifiers especially the HT600, 5 channel power amp. Used properly and carefully, it should give you many years of outstanding musical reproduction. Aesthetically, the HTP is a perfect match for the HT600 power amplifier, A3 CD player and the A3 Tuner.
The HTP can be used as either a high-end stereo preamplifier, a home cinema audio/video processor or a combination of both. The HTP performs Dolby Digital, Dolby Pro Logic and DTS Digital Surround decoding. The HTP will remain compatible with new multi-channel formats that will appear in the future. The HTP accepts up to eight digital input sources, eight line level input sources, a tape loop and two additional tape record outputs. It has four S-Video and four composite video inputs, SVideo and composite video outputs with OSD (On Screen Display). It also has, S-Video and composite outputs without OSD. The HTP has been configured by the factory to automatically sense the type of incoming audio and video signals. It will then select the mode that gives optimal reproduction quality.
Once the user has become more familiar with the setup menus the automatic detection can be disabled if required. The user can also change the name of the inputs so that they match the source device. i.e. Input 1 could be renamed to DVD. Input 2 to CD etc. When a two channel analogue (or digital) source has been selected you may then select different music modes that reproduce alternative effects. The modes are stereo, Dolby Pro-Logic, mono and four Music Modes: Natural, Concert, Club and Party. The various music modes cannot be used when the HTP detects a Dolby Digital or DTS multi-channel signal. The HTP will automatically disable the music mode functions. if these digital signals are detected. The HTP is supplied with two independently controlled trigger outputs, allowing the user to control external equipment. Each trigger has two output sockets and can be set to either 5V or 12V DC operation.